Saturday, June 7, 2014

How are video games projected on screen?




Lp182


I know that we aren't actually looking at a constant moving video game and that all we are seeing are multiple frames per second. But how is it done? I'm just curious how they do it. And are video games only projected at 30 frames and 60 frames per second, or are there other # of frames that can be shown in a given second?


Answer
The numbers 30 and 60 are a side effect of the NTSC format of television. Even back in the black-and-white days of TV, NTSC was a 640X480 image, interlaced (draws all the odd lines in one pass, then draws all the even lines on the next), and operating at 60 Hz. It wasn't until about 10 years ago that consumers started seeing any change to this, when EDTVs came on the scene and changed the interlaced to Progressive Scan (all lines are drawn sequentially on each pass), and then HDTVs changing the image resolution. Very recently, sets that can do 120 Hz have come onto the market. In Europe, they uses the PAL format, which ran at 50 Hz, but switched to 60 Hz for HDTV to simplify things for TV manufacturers (who had started to sell sets in Europe that could handle both 50 Hz and 60 Hz).

So for the longest time, TVs were displaying 60 half-frames (due to interlacing). As such, having a game run at 60 Hz would result in slightly smoother animation, but a lot more processing power which could otherwise be used to enhance the detail. So typically 60 frames games were smoother, but 30 frames games were much more detailed. Any other rate, and you the smoothness will vary, which is rather jarring to the immersiveness factor.

All of this only applies to consoles, though, since PCs have always had monitors that could do a variety of framerates, and therfore their games always strived for the highest framerate possible (and where 60 Hz is on the far low end) and don't really worry about the framerate dipping at times. High end modern monitors can typically do at least 140 Hz, and some older games on new hardware can actually create several hundred frames per second if certain settings are disabled.

Regardless of PC or console, the same programming technique is used for creating the frames and managing the process of sending them to the screen. Each object is placed in position in a virtual 3D space in RAM, textures are applied (only if they are facing the virtual camera's location), the view from the virtual camera is established, and the objects that the camera can see are flattened into a 2D image. This whole process is called rendering.

Then, the rendered image is put into a piece of memory (usually in the graphics chip itself) that has been designated as a "frame". This frame is then sent to the TV/monitor, and as it is being sent, a second image is being rendered and put into a second "frame". Once the first frame has been sent to the screen completely, the second frame is designated as the primary frame, and a third image is rendered and overwrites the first frame. This process is called Frame Buffering.

PCs (and maybe HDMI TV connections, I'm not sure) have the capability of the monitor being able to send a signal back to the game program and tell it when a frame is done being drawn. This allows the game to not switch frames while it is being sent to the screen (vertical synch), preventing a top section of an image and a bottom section of the same image displayed not matching up, refered to as "tearing". Since consoles know what frequency the TV is operating at based on the region (or more recently in Europe, through an option in the settings for either the game or the system), they can simply use an internal timer as an artificial vertical synch.

In the video game industry, what does an environment designer & character designer do in order?

Q. Do they draw an environment & characters first? And then scan it to a computer & then make the video game using a software or what? Lol


Answer
Most concepts start out as drawings and paintings than could be done in traditional media or on the computer. The concept art then goes to various departments to be interpreted and refined as a digital product. Usually a 3d modeler will create a character or environment in the computer using the concept art as a reference.

A character might be sculpted first in clay, and then digitally scanned to create a 3d model.

The 3d model then goes to a rigger who creates the animatable "skeleton" and controls inside the character. This is what the animator uses to move the character.




Powered by Yahoo! Answers

Title Post: How are video games projected on screen?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Yukie

Thanks For Coming To My Blog

No comments:

Post a Comment